iTA Series

iTA Series

Battery Portable Twinband Passive Intermodulation Analyzer

The iTA Series Passive Intermodulation (PIM) analyzer is the first multi-band battery powered PIM Test Analyzer versatile enough to support multiple test scenarios such as testing at the top of the tower, base of tower, roof top and in-building for DAS systems. This IEC compliant 20W, rugged, battery operated design includes a tablet computer in a ruggedized case for remote control. This allows hands-free dynamic testing that is safe and convenient. Add the optional Range to Fault (RTF) module to quickly identify the location of PIM and Return Loss sources. Evolved from a design legacy of field proven analyzers, this PIM Analyzer enables network operators to improve site performance by finding and eliminating sources of passive intermodulation at the cell site. An intuitive touch screen interface is also available for local control, performing tests and quickly generating site reports.

FEATURES

  • Multi cellular band testing in one instrument.
  • Fully configurable frequencies, powers and IM products
  • 7 inch tablet computer included for remote control of device
  • Simple to operate touch screen interface
  • Extensive combined band reporting capabilities
  • Spectrum monitor, frequency sweep and time trace modes
  • RTF compatible
  • Battery powered

technical specifications
system
Measurement method Reverse (reflected) PIM, 3rd & 5th order. (7th & 9th order in applicable bands)
Residual PIM < -117dBm/-160dBc maximum (<-125dBm/-168dBc typical)
Interface ports 2x RF output (7-16 DIN female), 1x USB 2.0 Host, 1x USB 2.0 Slave, 1x SD
2x monitor port (SMB female), 1x SMA-RP (Wi-Fi external antenna)
User interface Local - touch screen display 4.3in (109mm)
Remote - tablet computer (included), any Wi-Fi enabled user device with web browser
Return loss alarm Automatic detection and shut down when high RL is detected
transmitter
Transmit frequencies See model table
Frequency increment 100kHz
Frequency accuracy ± 5ppm maximum, aging ± 1ppm maximum after first year
Power per tone (adjustable) 0.1 to 20W (+20 to +43dBm in 1dB increments)
Power accuracy (per tone) ± 0.5dB maximum
receiver
Receive band (100kHz steps) See model table
Measurement noise floor < -128dBm
Measurement range -50dBm to -128dBm
electrical
Battery power 25.9 VDC, 2600 mAh, 67Wh Lithium Ion battery pack (removable)
Battery operating time Depends on usage, 2 hr minimum per battery pack
Battery charger Output: 29.4 VDC, 1.2 Amp
mechanical
Dimensions H x D x W 310 x 369 x 250mm | 12.2 x 14.5 x 9.8in
Weight 22.3kg | 49.2lbs
environmental
Temperature range -10ºC to +45ºC | +14°F to +113°F (operational)
Ingress protection IP54. IP67 when enclosed in optional hard case
Operational humidity 5% to 95% RH non-condensing
Storage temperature range -10°C to +60°C | +14°F to +140°F
Mechanical shock 40G shock rating
ordering information
models
Note: Unique Kaelus iTA models can be purchased based on any iPA model pairs. Contact your local Kaelus Sales representative.
  DESCRIPTION TX1 RANGE TX2 RANGE RX RANGE (PIM) RTF MODULE *
iTA-7991A LTE 800
GSM 900
791-796MHz
932.5-937.5MHz
808-821MHz
949-960MHz
832-862MHz
903-915MHz
RTF-1000A
 
iTA-0818A 850MHz
DCS1800
869MHz
1805-1812MHz
879-894MHz
1825-1880MHz
824-849MHz
1710-1785MHz
RTF-1000A
RTF-2000A
iTA-9118A EGSM900
DCS1800
925-935MHz
1805-1812MHz
945-960MHz
1825-1880MHz
880-915MHz
1710-1785MHz
RTF-1000A
RTF-2000A
iTA-7719A 700MHz
LOW/HIGH
PCS
AWS
728-731.5MHz

1930-1950MHz
1930-1950MHz
741-764MHz

1970-1990MHz
2110-2155MHz
698-716MHz; 776-802MHz
1850-1910MHz
1710-1755MHz
RTF-1000A

RTF-2000A
 
iTA-0819A 850MHz
PCS
AWS
869MHz
1930-1950MHz
1930-1950MHz
879-894MHz
1970-1990MHz
2110-2155MHz
824-849MHz
1850-1910MHz
1710-1755MHz
RTF-1000A
RTF-2000A
 
iTA-9121A EGSM900
UMTS2100
 
925-935MHz
2110-2130MHz
 
945-960MHz
2150-2170MHz
 
880-915MHz
1920-1980MHz; 2050-2090MHz
RTF-1000A
RTF-2000A
 
iTA-9126A EGSM900
LTE 2600
925-935MHz
2620-2630MHz
945-960MHz
2650-2690MHz
880-915MHz
2500-2570MHz
RTF-1000A
RTF-2600A

GET A QUOTE