Limits- Ripple (Sweep Spot)

Sign up to receive new training videos when released:
We value your feedback, rate this video:
Current rating: 0 (0 ratings)

A final type of Limit Line is the Ripple. In Limits on the iVA Cable & Antenna Analyzer, hit the "Add Limit" icon, rename the Limit as Ripple, add it to the Cable Loss trace. Set the MHz range and the Ripple value expected, such as 25dB. When you go back to Cable Loss measurement you have the Ripple spec available. Turn it on.  You can choose to turn off the Tolerance at this time to focus on the Ripple spec.  The first value is the Maximumum value over the span you have chosen to measure, the scond is the Minimum value, and the third is the point-by-point Average value. This may be the most appropriate use of Cable Loss measurements.