DCI0001F1V1

DCI0001F1V1

DC INSERTER

Designed to be deployed as an indoor DC inserter, or bias-T, in cellular base station systems, the Kaelus DCI0001F1Vx provides high quality performance.

FEATURES

  • Primary surge protection fitted to the DC input
  • LED indicator to show the presence of DC power
  • Designed to handle the high RF power levels of TX carriers associated with duplex tower mounted amplifiers
  • Can be mounted in a cable tray or directly onto the BTS RF connector

technical specifications
rf
Passband880 - 2200MHz
Return loss21dB minimum input and output
Insertion loss0.1dB maximum
Maximum input power with no damage200W (average) maximum
RF impedance50ohms
Intermodulation, passive<-155dBc with 2 x 20W carriers
dc
Voltage rating+40V DC (limited by surge protect circuits)
Current rating5A maximum
Power present indicationGreen LED (power applied)
environmental
For further details of environmental compliance, please contact Kaelus.
Temperature range-20ºC to +55ºC | -4ºF to +131ºF
Ingress protectionIndoor use only
Lightning protectionIEC-801-5, 8/20µs, ±10kA maximum, 10strikes each
MTBF>500,000 hours at 22ºC indoor
mechanical
FinishAluminium
ConnectorsDC in = molex, mini-fit junior (2-way)
Connector 1RF to BTS = 7/16 male
Connector 2RF to antenna = 7/16 female
ordering information
Part NumberDescription
DCI0001F1V1DC inserter, 7/16 (M) to the BTS including R18-0401, 6.0m/19.7ft PDU to DCI cable
DCI0001F1V4DC inserter, 7/16 (M) to the BTS including R18-0527, 2.0m/6.6ft PDU to DCI cable
optional accessories
Part NumberDescription
R18-0401Molex to molex cable assembly for connection from PUD000x to DCI0001 DC inserter, 6.0m/19.7ft
R18-0527Molex to molex cable assembly for connection from PUD000x to DCI0001 DC inserter, 2.0m/6.6ft
R90-PDU0003FxVx6-way power distribution and alarm unit, high power
electrical block diagram
ELECTRICAL BLOCK DIAGRAM
mechanical block diagram
MECHANICAL BLOCK DIAGRAM

GET A QUOTE