DBCT108F1V72-1

DBCT108F1V72-1

DIPLEXER 600-700/850, DC AUTOSENSE LED VISUAL STATUS, TWIN/DUAL TWIN

The Kaelus DBC0108 is a bi-directional Diplexer designed to combine 600 & 700 with 850 technologies, the DBCT108 provides excellent insertion loss and passive intermodulation performance. Bidirectional passage of DC/AISG is provided in this outdoor product.

FEATURES

  • Enables antenna/feeder sharing for 600-700 and 850 networks
  • Designed and 100% tested for low passive intermodulation
  • Autosense of DC allows operation at the bottom or the top of the tower
  • Very low insertion losses
  • High Return Loss

technical specifications
Port Name600-700850
Passband555 - 798MHz824 - 894MHz
Insertion loss0.15dB typical, 0.35dB maximum0.15dB typical, 0.3dB maximum
Return loss23dB typical, 22dB minimum
EVM≤0.5% across any 10MHz≤0.5% across any 20MHz
Group delay variation7.5ns typical, 20ns maximum
over any 10MHz
10ns typical, 20ns maximum
over any 20MHz
Absolute group delay7.5ns typical, 30ns maximum17.5ns typical, 30ns maximum
Maximum input power120W (average) / 1200W (PEP)120W (average) / 1200W (PEP)
Phase linearity over any 10MHz2° typical, 10 °maximum
electrical
Impedance50Ohms
Intermodulation products-156dBc maximum / -161dBc typical all ports with 2 x 20W carriers
Isolation50dB typical
dc / aisg
The DC/AISG path is automatically selected. In bottom of the tower applications (combiner mode), each RF channel port is sequentially checked for the presence of DC voltage. If more than one port has voltage, the port that has the highest (programmed) priority is passed to the common port. If a short circuit is detected on the common port DC/AISG is disabled. In top-of-tower applications (splitter mode), DC/AISG is passed to all ports that do not present a short circuit. If a short circuit is detected, the shorted RF port will be disabled for DC/AISG while other RF ports remain connected. To reduce current consumption at low supply voltage, LEDs are sequentially enabled.
Passband2.076 - 2.276MHz
Input voltage range7.5 - 30V DC
DC current rating2.5A continuous
Compliance3GPP, TS 25.461
Current consumption20mA typical, 25mA maximum
Port priority (combiner mode)1st) 600-700, 2nd) 850
LEDs1 bi-colour LED per RF port connector
LEDs, bottom of tower application:
- DC/AISG not presentOff
- DC/AISG passGreen
- DC/AISG present, not passedRed
LEDs, top of tower application:
- DC/AISG disabledOff
- DC/AISG passGreen
- All ports disabledR1/R1 LED red
environmental
For further details of environmental compliance, please contact Kaelus.
Temperature range-40ºC to +65ºC | -40ºF to +149ºF
Ingress protectionIP67
Altitude3000m/10,000ft maximum
Lightning protectionRF: ±5kA maximum (8/20us), IEC61312-1
MTBF>1,000,000 hours
ComplianceFCC part 15 subpart B
mechanical
Dimensions H x D x W (single unit)272 x 172 x 89 mm | 10.71 x 6.77 x 3.52 in
Dimensions H x D x W (twin unit)272 x 172 x 181 mm | 10.71 x 6.77 x 7.14 in
Weight5.5kg / 12lbs (single twin)
10.9kg / 23.9lbs (dual twin)
FinishPainted, light grey (RAL7035)
Wind LoadFront 55N, Side 304N (single twin)
Front 140N, Side 339N (dual twin)
At 74m/s (AS/NZS 1170-2-2011 Structural design - Wind actions - Cyclone areas)
Connectors4.3-10 (F) x 6 long neck (single twin)
4.3-10 (F) x 12 long neck (dual twin)
MountingPole/wall bracket supplied with two metal clamps for 45-178 mm diameter poles
ordering information
Part NumberDescription
DBC0108F1V72-1DIPLEXER 600-700/850 DC AUTO 600-700 WITH LED
DBCT108F1V72-1DIPLEXER TWIN 600-700/850 DC AUTO 600-700 WITH LED
DBCT108F1V72-2DIPLEXER TWIN X2 600-700/850 DC AUTO 600-700 WITH LED
electrical block diagram
ELECTRICAL BLOCK DIAGRAM
mechanical block diagram
MECHANICAL BLOCK DIAGRAM

GET A QUOTE