BROADBAND DC BLOCK
The Kaelus DCB0003F1V1 provides blocking of DC and AISG signals and allows RF to pass.
FEATURES
- Broad frequency range
- Low insertion loss
- Excellent passive intermodulation performance
TECHNICAL SPECIFICATIONS |
| RF PERFORMANCE | |||||||||||||||
| Passband | 698 – 2700MHz | ||||||||||||||
| Insertion loss | 0.1dB maximum | ||||||||||||||
| Return loss | 18dB minimum | ||||||||||||||
| Maximum input power | 500W average / 2kW peak | ||||||||||||||
| Intermodulation products | -161dBc typical / -158dBc maximum all ports with 2 x 20W carriers | ||||||||||||||
| GENERAL SPECIFICATIONS | |||||||||||||||
| DC voltage | ± 60V maximum | ||||||||||||||
| ENVIRONMENTAL | |||||||||||||||
| For further details of environmental compliance, please contact Kaelus. | |||||||||||||||
| Temperature range | -40ºC to +65ºC | -40°F to 149°F maximum | ||||||||||||||
| Ingress protection | IP67 | ||||||||||||||
| Lightning protection | ±10 kA, 8/20μs maximum shield to body, to IEC61000-4-5 ±8 kA, 8/20μs maximum centre pin to body, to IEC61000-4-5 |
||||||||||||||
| Connector sealing | For outdoor use Kaelus recommends that sealant tape be used to cover all connectors and body of the DC block. For details on how to seal connectors refer to the Kaelus TMA installation manual | ||||||||||||||
| MECHANICAL | |||||||||||||||
| Finish | Painted, light grey (RAL7035) | ||||||||||||||
| Connectors | 7-16 Male , 7-16 Female | ||||||||||||||
ORDERING INFORMATION |
|||||||||||||||
| PART NUMBER | DESCRIPTION | ||||||||||||||
| DCB0003F1V1 | BROADBAND DC BLOCK | ||||||||||||||
ELECTRICAL BLOCK DIAGRAM |
MECHANICAL BLOCK DIAGRAM |
