MI-163

TMA TWIN 900 E-GSM


Designed to be deployed in collocated 900 E-GSM systems, the Kaelus MI-163 enhances cell uplink coverage in 900 through improved system noise figure, thereby saving operational and capital expenditure.

FEATURES

  • Improved base station sensitivity through gain in the 900 uplink
  • Excellent noise figure performance
  • Full AISG operation and RET antenna support, AISG2.0 compatible
  • Small and light for minimum visual impact

TECHNICAL SPECIFICATIONS

BAND NAME 900 E-GSM
DOWNLINK
Passband 925 – 960MHz
Insertion loss 0.55dB typical, 0.8dB maximum
Return loss 20dB typical, 18dB minimum
Maximum input power 200W (average)
Intermodulation products -160dBc in RX band at ANT
UPLINK
Passband 880 – 915MHz
Gain 12dB
Return loss 18dB typical, 16dB minimum
Bypass return loss 14dB typical, 12dB minimum
Bypass loss 2.7dB maximum
Noise figure 1.4dB typical
Output IP3 25dBm typical
ELECTRICAL
Impedance 50Ohms
POWER SUPPLY AND ALARM (CURRENT WINDOW ALARM MODE, DEFAULT)
Current window alarm mode (CWA) is the default operating mode and can be configured to specific customer requirements. Please contact Kaelus for more information.
DC supply voltage +9 to +15V DC
DC supply current, normal mode 100- 130mA @ 12V
DC supply current, alarm mode 170 – 180 mA (9 -15V input)
AISG MODE OF OPERATION (AUTO SELECTED ON VALID AISG 2.0 FRAMES)
AISG signals can be applied to the BTS ports. The TMA unit switches to AISG mode when valid frames are detected on either port.
DC supply voltage +9.0V to +30V DC
AISG version 2.0
Power consumption, AISG mode < 2W
AISG connector, current rating IEC60130-9, 8-pin female
ENVIRONMENTAL
For further details of environmental compliance, please contact Kaelus.
Temperature range -40ºC to +65ºC | -40°F to +149°F
Ingress protection IP67
Lightning protection IEC61312-1, RF: ±5kA (8/20us), AISG: ±2.5kA (8/20us)
MTBF >1,400,000 hours
Compliance EMC: EN 301 489-8
Safety: EN 62368-1
Operation: ETSI EN 300 019-1-4 class 4.1E
Storage: ETS 300 019-1-1 class 1.2
MECHANICAL
Dimensions H x D x W 246 x 68 x 231 mm | 9.7 x 2.7 x 9in (excluding brackets and connectors)
Weight 4.7kg | 10.4lbs
Finish Powder coated, NCS 1502-R
Connectors 4.3-10 (F) long neck or 7/16(F)
AISG (F)
Mounting Pole/wall bracket using two metal clamps, suits 40-140mm diameter poles
SHIPPING INFORMATION
Carton size 375 x 299 x 169mm │ 14.76 x 11.77 x 6.65in
Gross weight (including packaging) 5.5kg │ 12.13lb
Carton Qty / Pallet 48

ORDERING INFORMATION

PART NUMBER CONFIGURATION OPTIONAL FEATURES CONNECTORS AISG MODE
MI-16301 TWIN, 2 in / 2 out BASE MODEL 7/16 (F) Refer to AISG MODE OF OPERATION section
MI-16331 TWIN, 2 in / 2 out BASE MODEL 4.3-10 (F) Refer to AISG MODE OF OPERATION section,

ELECTRICAL BLOCK DIAGRAM

MECHANICAL BLOCK DIAGRAM

 

Related Products

Contact Us
RMA
Support
Career
Resources
Language
Scroll to Top

Access this document

Please enter your details to download the file.
Thank you. You can now access the document below.