DIPLEXER 600-700/850
The Kaelus DBCT108 is a bi-directional Diplexer designed to combine 600-700 with 850 technologies, the DBCT108 provides excellent insertion loss and passive intermodulation performance. Bidirectional passage of DC/AISG is provided in this outdoor product.
FEATURES
- Enables antenna/feeder sharing for 600-700 and 850 networks
- Designed and 100% tested for low passive intermodulation
- Autosense of DC allows operation at the bottom or the top of the tower
- Low insertion losses
- Good return loss
Electrical block diagram
Mechanical block diagram
Technical specifications |
|||||||||||||||
| Port Name | 600-700 | 850 | |||||||||||||
| Passband | 555 – 798MHz | 824 – 894MHz | |||||||||||||
| Insertion loss | 0.15dB typical | 0.2dB typical | |||||||||||||
| Return loss | 23dB typical | ||||||||||||||
| EVM | ≤0.5% across any 10MHz | ≤0.5% across any 20MHz | |||||||||||||
| Group delay variation | 7.5ns typical over any 10MHz | 10ns typical over any 20MHz | |||||||||||||
| Absolute group delay | 7.5ns typical | 17.5ns typical | |||||||||||||
| Maximum input power | 120W (average) / 1200W (PEP) | 120W (average) / 1200W (PEP) | |||||||||||||
| Phase linearity over any 10MHz | 2° typical, 10 °maximum | ||||||||||||||
Electrical |
|||||||||||||||
| Impedance | 50Ohms | ||||||||||||||
| Intermodulation products | -156dBc maximum with 2 x 20W carriers | ||||||||||||||
| Isolation | 50dB typical | ||||||||||||||
DC / aisg |
|||||||||||||||
| The DC/AISG path is automatically selected. In bottom of the tower applications (combiner mode), each RF channel port is sequentially checked for the presence of DC voltage. If more than one port has voltage, the port that has the highest (programmed) priority is passed to the common port. If a short circuit is detected on the common port DC/AISG is disabled. In top-of-tower applications (splitter mode), DC/AISG is passed to all ports that do not present a short circuit. If a short circuit is detected, the shorted RF port will be disabled for DC/AISG while other RF ports remain connected. | |||||||||||||||
| Passband | 2.076 -2.276MHz | ||||||||||||||
| Input voltage range | 7.5 – 30V DC | ||||||||||||||
| DC current rating | 2.5A continuous | ||||||||||||||
| Port priority (combiner mode) | 1st) 600-700, 2nd) 850 | ||||||||||||||
Environmental |
|||||||||||||||
| For further details of environmental compliance, please contact Kaelus. | |||||||||||||||
| Temperature range | -40ºC to +65ºC | -40ºF to +149ºF | ||||||||||||||
| Ingress protection | IP67 | ||||||||||||||
| Altitude | 3000m/10,000ft maximum | ||||||||||||||
| Lightning protection | RF: ±5kA maximum (8/20us), IEC61312-1 | ||||||||||||||
| MTBF | >1,000,000 hours | ||||||||||||||
| Compliance | FCC Part 15 subpart B | ||||||||||||||
Mechanical |
|||||||||||||||
| Weight | 5.5kg / 12lbs (single twin) 10.9kg / 24lbs (dual twin) |
||||||||||||||
| Finish | Painted, light grey (RAL7035) | ||||||||||||||
| Connectors | 4.3-10 (F) x 6 long neck (single twin) 4.3-10 (F) x 12 long neck (dual twin) |
||||||||||||||
| Wind Load | Front 55N, Side 304N (single twin) Front 140N, Side 339N (dual twin) At 74m/s (AS/NZS 1170-2-2011 Structural design – Wind actions – Cyclone areas) |
||||||||||||||
| Mounting | Pole/wall bracket supplied with two metal clamps for 45-178 mm diameter poles | ||||||||||||||
Ordering information |
|||||||||||||||
| Part Number | Configuration | Optional Features | Connectors | DC/AISG Configuration | |||||||||||
| DBC0108F1V72-1 | SINGLE 1 in / 2 out | DC AUTOSENSING WITHOUT LED | 4.3-10 (F) | PRIORITY 600-700/850 | |||||||||||
| DBCT108F1V72-1 | TWIN 2 in / 4 out | DC AUTOSENSING WITHOUT LED | 4.3-10 (F) | PRIORITY 600-700/850 | |||||||||||
| DBCT108F1V72-2 | QUAD 4 in / 8 out | DC AUTOSENSING WITHOUT LED | 4.3-10 (F) | PRIORITY 600-700/850 | |||||||||||
