CIS-0001A
PASSIVE INTERMODULATION (PIM) SOURCE
Features:
- Passive Intermodulation (PIM) test source
- Repeatable high PIM level over wide frequency range
- Used to verify PIM test equipment operation
- Used to calibrate Range to Fault module for PIM testing
- Rugged shock proof design
- Heat shield for personal protection
- Dust cover for prolonged life
TECHNICAL SPECIFICATIONS |
| SYSTEM | |||||||||||||||
| *The Nominal PIM level for the CIS-0001A can vary within the range shown. The Nominal PIM level will be repeatable within ± 3dB for subsequent PIM measurements at a specific frequency. | |||||||||||||||
| Frequency range | 500MHz – 2700MHz | ||||||||||||||
| RF impedance | 50ohms | ||||||||||||||
| Return loss | 18dB minimum | ||||||||||||||
| Nominal PIM level* | As per graph | ||||||||||||||
| RF power rating | 10W, continuous | 50W, 3 mins | ||||||||||||||
| Connector | 7-16 Male | ||||||||||||||
| Mating torque | Install slightly more than hand tight to the RF output port of the PIM Analyzer. Tightening with a 7-16 DIN torque wrench is not recommended. | ||||||||||||||
MECHANICAL |
|||||||||||||||
| Weight | 0.5kg | 1.0lb | ||||||||||||||
| Dimensions (L x D) | 190 x 60mm | 7.48 x 2.36in | ||||||||||||||
ENVIRONMENTAL |
|||||||||||||||
| Temperature range | -10ºC to +50ºC | +14°F to +122°F (operational) | ||||||||||||||
