BATTERY PORTABLE PASSIVE INTERMODULATION ANALYZER
The iPA Series Passive Intermodulation (PIM) analyzer is the first battery powered PIM Test Analyzer versatile enough to support multiple test scenarios such as testing at the top of the tower, base of tower, roof top and in-building for DAS systems. This IEC compliant 20W, rugged, battery operated design can be operated via remote control with any WiFi enabled phone, tablet or laptop computer. This allows hands-free dynamic testing that is safe and convenient. Add the optional Range to Fault (RTF) module to quickly identify the location of PIM and Return Loss sources. Evolved from a design legacy of field proven analyzers, this PIM Analyzer enables network operators to improve site performance by finding and eliminating sources of passive intermodulation at the cell site. An intuitive touch screen interface is also available for local control, performing tests and quickly generating site reports.
FEATURES
- Rugged and reliable; designed with tower climbers in mind
- Fully configurable frequencies, powers and IM products
- Remote control possible with handheld device, eg tablet, cell phone
- Simple to operate touch screen interface
- Extensive reporting capabilities
- Spectrum monitor, frequency sweep and time trace modes
- RTF compatible
- Battery powered
- Two models available A Series 0.1 to 20W, D Series 1W to 40W
TECHNICAL SPECIFICATIONS |
| SYSTEM | |||||||||||||||
| Measurement method | Reverse (reflected) PIM, 3rd, 5th and 7th order (iPA-0707D and iPA-0850A) Reverse (reflected) PIM, 3rd, 5th, 7th and 9th order (other models) |
||||||||||||||
| Residual PIM | < -117dBm/-160dBc maximum (<-125dBm/-168dBc typical) at 2 x 20W | ||||||||||||||
| Interface ports | 1x RF output (7-16 DIN female), 1x USB 2.0 Host, 1x USB 2.0 Slave, 1x SD 1x monitor port (SMB female), 1x SMA-RP (Wi-Fi external antenna) |
||||||||||||||
| User interface | Local – touch screen display 4.3in (109mm) Remote – tablet, computer, any Wi-Fi enabled user device with web browser |
||||||||||||||
| Return loss alarm | Automatic detection and shut down when high RL is detected | ||||||||||||||
TRANSMITTER |
|||||||||||||||
| Transmit frequencies | See model table | ||||||||||||||
| Frequency increment | 100kHz | ||||||||||||||
| Frequency accuracy | ± 5ppm maximum, aging ± 1ppm maximum after first year | ||||||||||||||
| Power per tone (adjustable) | All A series Models 0.1 to 20W (+20 to +43dBm in 1dB increments) iPA-0600D 100mW to 40W (+20 to +46dBm in 1dB increments) iPA-0707D 1 to 40W (+30 to +46dBm in 1dB increments) |
||||||||||||||
| Power accuracy (per tone) | ± 0.5dB maximum | ||||||||||||||
RECEIVER |
|||||||||||||||
| Receive band (100kHz steps) | See model table | ||||||||||||||
| Measurement noise floor | < -128dBm | ||||||||||||||
| Measurement range | -50dBm to -128dBm | ||||||||||||||
ELECTRICAL |
|||||||||||||||
| Battery power | 25.2 VDC, 3.45Ah, 87Wh Lithium Ion battery packs (removable) | ||||||||||||||
| Battery operating time | Depends on usage, 3 hr minimum per battery pack | ||||||||||||||
| Battery charger | Output: 29.4 VDC, 1.2 Amp | ||||||||||||||
| MECHANICAL | |||||||||||||||
| Dimensions H x D x W | 369 x 160 x 240mm | 14.5 x 6.3 x 9.4in | ||||||||||||||
| Weight | 12kg | 26lbs | ||||||||||||||
ENVIRONMENTAL |
|||||||||||||||
| Temperature range | -10ºC to +45ºC | +14°F to +113°F | ||||||||||||||
| Ingress protection | IP54. IP67 when enclosed in optional hard case | ||||||||||||||
| Operational humidity | 5% to 95% RH non-condensing | ||||||||||||||
| Storage temperature range | -10°C to +60°C | +14°F to +140°F | ||||||||||||||
| Mechanical shock | 40G shock rating | ||||||||||||||
ORDERING INFORMATION |
| MODELS | |||||||||||||||
| DESCRIPTION | TX1 RANGE | TX2 RANGE | RX RANGE (PIM) | RTF MODULE * | |||||||||||
| iPA-0600D | 600MHz | 617-630 MHz | 640-652 MHz | 663-698MHz | RTF-1000 | ||||||||||
| iPA-0707D | 700MHz LOW/HIGH | 728-731.5MHz | 741-764MHz | 698-716MHz 776-802MHz |
RTF-1000 | ||||||||||
| iPA-0703A | APT700 LTE | 758-768MHz | 778-803MHz | 703-748MHz | RTF-1000 | ||||||||||
| iPA-0790A | LTE 800 | 791-796MHz | 808-821MHz | 832-862MHz | RTF-1000 | ||||||||||
| iPA-0850A | 850MHz | 869MHz | 879-894MHz | 824-849MHz | RTF-1000 | ||||||||||
| iPA-0901A | EGSM900 | 925-935MHz | 945-960MHz | 880-915MHz | RTF-1000 | ||||||||||
| iPA-1800A | DCS1800 | 1805-1812MHz | 1825-1880MHz | 1710-1785MHz | RTF-2000 | ||||||||||
| iPA-1802A | DCS1800 | 1805-1830MHz | 1840-1880MHz | 1710-1785MHz | RTF-2000 | ||||||||||
| iPA-1921A | Dual Band PCS/AWS | 1930-1950MHz 1930-1950MHz |
1970-1990MHz 2110-2155MHz |
1850-1910MHz 1710-1755MHz |
RTF-2000 | ||||||||||
| iPA-2100A | UMTS (3rd & 7th) | 2110-2130MHz | 2150-2170MHz | 1920-1980MHz 2050-2090MHz |
RTF-2000 | ||||||||||
| iPA-2600A | LTE 2600 | 2620-2630MHz | 2650-2690MHz | 2500-2570MHz | RTF-2600 | ||||||||||
| Notes | Specifications subject to change without notice. | ||||||||||||||
| 1. | *Range to Fault is an optional accessory available for iPA test instruments which enables users to measure distance to return loss faults as well as distance to PIM faults. The RTF module is sold separately. | ||||||||||||||
| 2. | Dual Battery charger for standalone charging sold separately. | ||||||||||||||
| 3. | Tablet to control the iPA is not included. System requirements – Kaelus Unify and IPA Software |
||||||||||||||
| WARNING: | Use of the portable PIM analyzer in a radiating mode, for example when connected to an antenna not enclosed in an anechoic environment, may be a violation of licensing regulations. Users should obtain permission in advance from any licensed operators that might be affected by these tests. Furthermore, radiating high RF power can pose a personnel risk. | ||||||||||||||
WHAT’S IN THE BOX? |
|||||||||||||||
| PART NUMBER | DESCRIPTION | QUANTITY | |||||||||||||
| R29-4382 | AC ADAPTOR FOR IPA | 1 | |||||||||||||
| R92-0287 | IPA BATTERY | 1 | |||||||||||||
ACCESSORIES |
